Best Drybox Filament in 2022 [*Top Picks*]

Looking for the best drybox filament on the market? We’ve got you covered. Check out our ratings of absolute bestsellers below and make a final decision.

714 Reviews Scanned

  • Sovol Filament Dryer, SH01 Filament Dehydrator 3D Printer Spool Holder, Dry Box for Keeping Filament Dry During 3D Printing, Compatible with 1.75mm, 2.85mm Filament and PLA PETG TPU ABS Material
    Bestseller #1
    Sovol Filament Dryer, SH01 Filament Dehydrator 3D Printer Spool Holder, Dry Box for Keeping Filament Dry During 3D Printing, Compatible with 1.75mm, 2.85mm Filament and PLA PETG TPU ABS Material (465)
      【Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament. 【Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time. Setting temperature 40 °, 45 °, 50 ° C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16℃, the temperature in the dryer box would not come up to 50℃. But do not worry, this would not decrease drying effect. 【Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality. 【Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation. 【Heating More Evenly】 The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly. SH01 makes drying more efficient. Any questions about the product please feel free to contact us. Our technical support team will provide service as soon as we can.
  • SUNLU 3D Printer Filament Dryer, FilaDryer S2 Storage Dry Box for 3D Printing, 360° Surround Heating, Large-Size Touch Screen, Remove Moisture from Wet Filaments, Spool Holder, Black
    Bestseller #1
    SUNLU 3D Printer Filament Dryer, FilaDryer S2 Storage Dry Box for 3D Printing, 360° Surround Heating, Large-Size Touch Screen, Remove Moisture from Wet Filaments, Spool Holder, Black (26)
      ①【Rescue Poor Printing】Newest SUNLU FDM 3D Filament Dryer S2 is more efficient to solve stringing, clogging, poor adhesion, poor printing quality and layer shift of 3d printing filament caused by ambient humidity. ②【360°Embracing Heating】The 3D filament dry box S2 has added upper and lower heating plates to achieve all-round surrounding heating and rapid drying, breaking through the heating temperature to 35℃~70℃. ③【Large-size Touch Screen】New 3.42*2.87inch touch screen, tablet-like operation experience. One-key switching between ℃ and ℉. According to various filament, user-friendly one-key recommended temperature setting. ④【Real-time Humidity Detection】Built-in high-precision humidity detection sensor, displaying real-time humidity inside the filament dryer. Assist to judge the drying effect.Automatic sleep standby after drying. ⑤【High Filament Compatibility】Compatible with all the mainstream 3D filament brands and all standard filament diameters 1.75mm/2.85mm/3.00mm; Works perfectly with PLA、PLA+、PETG、TPU、ABS etc,Including high-end filament PA、PC.
  • Comgrow Filament Dryer, Upgraded Filament Dry Box, Large-Capacity 3D Filament Dehydrator for 2KG Filament, Compatible with 1.75mm, 2.85mm Filament and PLA PETG TPU ABS Material
    Bestseller #1
    Comgrow Filament Dryer, Upgraded Filament Dry Box, Large-Capacity 3D Filament Dehydrator for 2KG Filament, Compatible with 1.75mm, 2.85mm Filament and PLA PETG TPU ABS Material (48)
      【Large Capacity】 Compared to other 3d filament dryers, our filament box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Note: Only used for the drying of 3D printer Filament. 【Heating & Drying Function】 The damp 3D printer filament leads to tension, clogging, poor adhesion and shifting of layers. This filament dry box keeps the filament dry and restores the performance of the 3d printer filaments. Please open the PTFE plugs on the top of the box during heating for Moisture evaporation. 【Optimized Heating Method】 The filament dehydrator makes drying more efficient. The unique design of the fan in the box is based on the principle of othermodynamics of air, makes the filament heated more evenly. 【Excellent Sealed Storage Box】 The silicone seal makes it possible to store the filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality. 【User-friendly Design&1 Year Warranty】 2 inch large screen LCD monitor, can display the humidity, temperature in the filament storage box in real time. Setting temperature 40 °, 45 °, 50 ° C and setting time from 6 hours to 12 hours.
  • Upgraded Dryer Box of 3D Printer Filament, SUNLU 3D Filament Dryer Box S1, Keeping Filaments Dry During 3D Printing, Filament Holder, Compatible with 1.75mm, 2.85mm, 3.00mm Filament, Storage Box
    Bestseller #1
    Upgraded Dryer Box of 3D Printer Filament, SUNLU 3D Filament Dryer Box S1, Keeping Filaments Dry During 3D Printing, Filament Holder, Compatible with 1.75mm, 2.85mm, 3.00mm Filament, Storage Box (769)
      【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments. 【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market 【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect. 【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc.; C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm. 【User-friendly Design&1 Year Guaranteed After-Sales Service】 A: The design of two rollers inside the box allows you to print while drying; B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work; D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing
  • Upgraded 3D Printer Filament Dryer Box, SUNLU Filament Dehydrator Dry Box, Keep Filament Dry During 3D Printing, Spool Holder,Compatible with 1.75mm, 2.85mm, 3.00mm Filament,Storage Box
    Bestseller #1
    Upgraded 3D Printer Filament Dryer Box, SUNLU Filament Dehydrator Dry Box, Keep Filament Dry During 3D Printing, Spool Holder,Compatible with 1.75mm, 2.85mm, 3.00mm Filament,Storage Box (124)
      ①【Keep dry, good printing effect】Dust-free, moisture-free. 3D printer filaments are hygroscopic, moisture can cause printing failure, SUNLU filament dryer box help to dry excess moisture, keep the filament dry, no more brittle PLA, PETG, ABS filament. ②【Fully assembled and easy to use】SUNLU dry box is simple to operate, turn on by hit either button, hold the left button to change the dry time, press the right button to change the temperature setting. SUNLU dryer box can be used as a spool holder. The bearings that hold the filaments are very stable and allow the filament to roll steadily. ③【Simple but Effective】The print quality will be better if using filament dried by SUNLU filament dehydrator box, surface smoother, layer adhesion increased. It can be more helpful if you live in a humid temperature zone.SUNLU filament dryer box is easy to open and the lid is transparent allowing direct inspection of the length of filament remaining in the box. ④【High Compatibility】The adjustable temperature(time) range is 35-55℃(0-24hours), SUNLU dryer box can bake most types of 1KG filament at a designated temperature for hours. Maximum capacity of the drying oven: 210*85 mm, can accommodate filament diameter: 1.75mm/2.85mm/3mm. ⑤【Good After-Sales Service】After-Sales Service and Technical Support are provided. If you have any questions about SUNLU filament dehydrator box, don't hesitate to contact us.
  • Dry Box for 3D Filament Storages, JAYO Filament Dryer Box, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm, 2.85mm, 3.00mm Filament and PLA PETG TPU ABS Material, Spool Holder
    Bestseller #1
    Dry Box for 3D Filament Storages, JAYO Filament Dryer Box, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm, 2.85mm, 3.00mm Filament and PLA PETG TPU ABS Material, Spool Holder (172)
      【3D FILAMENT DRYER AND STORAGE】Dry Box is designed to keep filament dry and dehumidify various kind of filaments, Heating during the printing Provide a dry storage environment for 3D printer filament. 【24 HOURS KEEP FILAMENT DRY】The large-area heating block can ensure that the contact area between the filament and the filament is continuously rotated in the dry hot box to remove water. The best bearing, thereby reducing all resistance on the filament of the 3D printer 【EASY TO USE】The filament drying oven has a 2-inch LCD screen and only two buttons (set temperature and time), the default oven drying time is 6 hours, short press the left button to reduce the drying time. Temperature, short press the right button to increase the temperature. 【MAXIMUM CAPACITY】Support the maximum capacity: Φ210*85(H)mm, and the diameter of consumables line: 1.75mm/2.85mm/3.00mm.The Dry Box is compatible with 99% of 3D printing filaments and 3d printer. 【AVOID INTERRUPTION】 Drying box has a quiet sound even when running, and can be used with various FDM printers. We provide a 6-month warranty for the whole machine, if you have any questions about the operation of the product, please feel free to contact us.
  • SUNLU Filament Dryer, FilaDryer S1 Filament Dry Box, Compatible with 99% of 1KG PLA PETG ABS TPU 3D Printer Filaments, Dehydrator Storage Box, Filament Spool Holder, Black
    Bestseller #1
    SUNLU Filament Dryer, FilaDryer S1 Filament Dry Box, Compatible with 99% of 1KG PLA PETG ABS TPU 3D Printer Filaments, Dehydrator Storage Box, Filament Spool Holder, Black (26)
      【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments. 【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market 【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect. 【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc.; C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm. 【User-friendly Design&1 Year Guaranteed After-Sales Service】 A: The design of two rollers inside the box allows you to print while drying; B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work; D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing
  • Upgraded Dry Box for 3D Filament Storages, Dehydrator of Filament Dryer Box, SUNLU 3D Filament Enclosure Compatible with 1.75mm, 2.85mm, 3.00mm 3D Filament, Spool Holder (Bluegrey)
    Bestseller #1
    Upgraded Dry Box for 3D Filament Storages, Dehydrator of Filament Dryer Box, SUNLU 3D Filament Enclosure Compatible with 1.75mm, 2.85mm, 3.00mm 3D Filament, Spool Holder (Bluegrey) (133)
      【Say goodbye to the printing failure】3D printing filaments are hygroscopic, moisture can cause printing failure. SUNLU filament dryer box helps to dry excess moisture, improve your 3D model, and make the filaments say goodbye to the troubles of drawing, clogging, and poor adhesion. 【No assembly required, easy to operate and effective】SUNLU 3D printer Filament enclosure requires no assembly and can be used right out of the box. There are only two buttons, and the operation is convenient and simple. SUNLU filament dehydrator box makes the printing effect better and the surface of the model is smoother. No more brittle PLA+, PETG, ABS filament. 【Personalized settings, strong compatibility】The default drying time of SUNLU dryer box is 6 hours, you can also set the drying time and temperature according to your own preferences. The time setting range is 0~24 hours, and the temperature range is 35°C~55°C. The drying box is compatible with filaments of different brands such as: SUNLU, ERYONE, ESUN, GEEETECH, etc. It is also perfectly suitable for all standard filament diameters: 1.75mm/2.85mm/3.00mm. 【Ultra-quiet design, free your hands】SUNLU filament Enclosure box is very quiet at work, less than 10db when running, no disturbing of your life and work. The design of two rollers in the box allows you to print while drying, improving printing efficiency and freeing your hands. 【Perfect after-sales service and quick reply to emails】Provide after-sales service and professional technical support, and also include a one-year warranty period. Reply to emails quickly during working hours, if you have any questions about SUNLU Filament Dehydrator Box, please feel free to contact us.
  • Slice Engineering - Filament Drying Desiccant - Place Inside Spool, Dry Box, Storage Bag, Dryer Box, or Any Filament Storage! - Alumina Desiccants 10x More Powerful Than Silica Gel - 3-Pack
    Bestseller #1
    Slice Engineering - Filament Drying Desiccant - Place Inside Spool, Dry Box, Storage Bag, Dryer Box, or Any Filament Storage! - Alumina Desiccants 10x More Powerful Than Silica Gel - 3-Pack (5)
      ✔️ DRY WET FILAMENT - Our activated alumina desiccant is strong enough to wick moisture out of the air and from already wet filament! ✔️10X MORE POWERFUL - Activated alumina desiccants are 10X times stronger than standard silica gel desiccants ✔️DESIGNED FOR FILAMENT - Our Filament Drying Desiccant fits right inside your filament spool and is infinitely rechargeable! ✔️INCLUDES FREE INDICATOR CARD - Each Filament Drying Desiccant comes with a humidity indicator card so you can watch that humidity drop! ✔️USA MADE - All components are manufactured locally and assembled here in our Gainesville, Florida location!
  • Upgraded 3D Printer Filament Dryer, SUNLU Dry Box for Filament Storage, Keep Filament Dry During 3D Printing, Compatible with 1.75mm, 2.85mm, 3.00mm 3D Filament, Filament Holder
    Bestseller #1
    Upgraded 3D Printer Filament Dryer, SUNLU Dry Box for Filament Storage, Keep Filament Dry During 3D Printing, Compatible with 1.75mm, 2.85mm, 3.00mm 3D Filament, Filament Holder (67)
      【SUNLU Dryer and Storage Box】SUNLU dryer box is specifically made for drying 3d printer filament, intended to remove moisture from the filament. It can keep the 3d filament dry during printing and can be used as a filament storage box. 【Rapid Heating and Constant Temperature】The dryer box can be quickly heated to the preset temperature, and keep working within the preset time. The built-in rotating shafts keep rotating the filament, evenly heated and remove moisture. 【Large Capacity and Useful Design】Maximum capacity of the Dry box is 210*85mm, it works perfectly with 1.75mm/2.85mm/3.00mm diameters filament. It's designed with a transparent lid that you could check the filament without open the lid. 【Simple but Effective】The dryer box is pretty easy to use, it crams in a lot of functionality even with only two buttons(set temperature, time and more). It can help to keep moisture out of the filament, get dry and stay dry. 【Multiple Settings】The temperature ranges is 35-55℃, the working time range is 0-6 hours, you can set different temperatures and times for different materials of filament, get the filament dry and have better print results, very useful.
  • Also read Biker shoes for men Also read Garter belts Also read Compressed air duster for computer Also read Bright solar hanging lanterns

Leave a Reply

Your email address will not be published. Required fields are marked *